code：CG-WA
CG-WA is use inorganic binder to bind several alumina grains（20um to 100um） together, have sharp blade in every direction and introduce natural porosity to abrasive tools.
TYPICAL PROPERTTY：
CG – Application for Vitrified Wheel：
1.Benefit of CG for V-bond wheel
l More open structure by bigger porosity
l More uniform of wheel and controlled porosity by precise OD
l Porosity inducer not needed
2. Mainly application
l Creep feeding
l Gear Grinding（Form/Bevel/Worm）
CG – Application concept – Resin bond wheel：
1.Benefit of CG for R-bond wheel
l More sharpness from CG grains continuous tear off
l More stiffness by CG grains support
l More open structure by bigger porosity
l More uniform of wheel by precise OD
2. Mainly application
l Hot/Cold mill roll application
l Fine grinding( grit size 400 or more fine)
l Double flat application
CG Application for Depressed Wheel：
1.Benefit of CG for Depressed Wheel
l More open structure by bigger CG OD and high efficiency
l Stable working condition and performance
l Use fine grains to achieve fine roughness
2. Mainly application
l Auto grinding application
l High surface roughness requirement application
CG – Application concept – Coated Abrasive
1.Benefit of CG for Coated Abrasive
l More sharpness from CG grains continuous tear off
l Stable working condition
l Use fine grains to achieve fine roughness
l Longer life and stable performance
2. Mainly application
l Lower pressure application
l High roughness requirement application
